The website is currently being maintained, we apologise for any inconvenience. For the old version of the site, click here
Impregnant PROSEAL, Tenax
Price:
0.00€
Colourless liquid impregnant for impregnating stone, concrete and agglomerates.
Protects against the effects of moisture and grease, facilitates surface maintenance.
Does not form a film on the surface, allowing the material to ‘breathe’.
The product may slightly enhance the colour of the stone.
Suitable for indoor and outdoor use.
Do not use on surfaces likely to come into contact with foodstuffs.
Only for professional use.
Additional information
| Purpose | |
|---|---|
| Colour | |
| Capacity | |
| Manufacturer |
Do you have questions about the product?
Fill out the contact form below and we will contact you!
Directions for use: apply the impregnant evenly with a brush, sponge or cloth on a dry, clean surface. Water, dust and dirt can adversely affect the result. Wipe off any excess with a dry cloth, without allowing it to dry. Excess product may cause a sticky, glossy film to form on the surface and should be wiped off immediately. We recommend applying the impregnator twice within 10-15 minutes. For the first time, try on a piece of material that is not needed or on the invisible side of the product. Walking on floors treated with this product is not allowed before 24 hours. 1L is sufficient to impregnate ≈ 20-30m2 of the surface (depending on the porosity and absorption properties of the material). Shelf life at room temperature 2 years.
| Technical characteristics | PROSEAL |
| Colour | Colourless |
| Status | Liquid |
| Drying time | ~60 min. |
| Full impregnation effect | After 24 hours |
Directions for use: apply the impregnant evenly with a brush, sponge or cloth on a dry, clean surface. Water, dust and dirt can adversely affect the result. Wipe off any excess with a dry cloth, without allowing it to dry. Excess product may cause a sticky, glossy film to form on the surface and should be wiped off immediately. We recommend applying the impregnator twice within 10-15 minutes. For the first time, try on a piece of material that is not needed or on the invisible side of the product. Walking on floors treated with this product is not allowed before 24 hours. 1L is sufficient to impregnate ≈ 20-30m2 of the surface (depending on the porosity and absorption properties of the material). Shelf life at room temperature 2 years.
| Technical characteristics | PROSEAL |
| Colour | Colourless |
| Status | Liquid |
| Drying time | ~60 min. |
| Full impregnation effect | After 24 hours |