The website is currently being maintained, we apologise for any inconvenience. For the old version of the site, click here
Impregnant QUARTZ TONER, Tenax
Price:
0.00€
Colourless liquid impregnator for impregnating quartz agglomerates.
Gives theeffect of wet stone, enhancing the colour and texture of the stone.
Helps to hide minor scratches.
Protects against the effects of moisture and grease, facilitating surface maintenance.
Suitable for indoor and outdoor use.
Suitable forsurfaces that may come into contact with foodstuffs, ideal for kitchen countertops .
Additional information
| Purpose | |
|---|---|
| Colour | |
| Capacity | |
| Manufacturer |
Do you have questions about the product?
Fill out the contact form below and we will contact you!
Directions for use: apply the impregnant evenly with a brush, sponge or cloth on a dry, clean surface. Water, dust and dirt may adversely affect the result. Avoid water on the surface 24 hours before and 24 hours after impregnation. Wipe off any excess with a dry cloth without allowing it to dry. Excess preparation may cause a sticky, glossy film to form on the surface. A repeat treatment after 10-15 minutes is recommended. For the first application, try on an unnecessary piece of material or on the invisible side of the product. Walking on treated floors is not allowed until after 24 hours. 1L is sufficient to impregnate ≈ 20-28m2 (depending on porosity and absorbency of the material). A wet surface effect is obtained immediately after impregnation. Dries within 60 min. Shelf life 2 years at room temperature.
| Technical characteristics | Quartz Toner |
| Colour | Colourless |
| Status | Liquid |
| Wet surface effect | Immediately available |
| Full impregnation effect | After 24 hours |
Directions for use: apply the impregnant evenly with a brush, sponge or cloth on a dry, clean surface. Water, dust and dirt may adversely affect the result. Avoid water on the surface 24 hours before and 24 hours after impregnation. Wipe off any excess with a dry cloth without allowing it to dry. Excess preparation may cause a sticky, glossy film to form on the surface. A repeat treatment after 10-15 minutes is recommended. For the first application, try on an unnecessary piece of material or on the invisible side of the product. Walking on treated floors is not allowed until after 24 hours. 1L is sufficient to impregnate ≈ 20-28m2 (depending on porosity and absorbency of the material). A wet surface effect is obtained immediately after impregnation. Dries within 60 min. Shelf life 2 years at room temperature.
| Technical characteristics | Quartz Toner |
| Colour | Colourless |
| Status | Liquid |
| Wet surface effect | Immediately available |
| Full impregnation effect | After 24 hours |