The website is currently being maintained, we apologise for any inconvenience. For the old version of the site, click here
Impregnant HMK S235, Möeller Chemie
Price:
0.00€
It is a ready-to-use acrylic-based silicone impregnator that reduces the penetration of dirt and moisture.
Optimally enhances the colour and texture of the stone. After drying, the surface becomes matt. Poorly absorbent surfaces acquire a low matt sheen.
Suitable for rough, coarse ground or sandblasted, highly fluid-absorbent surfaces of limestone, granite, marble, sandstone, concrete, terrazzo.
Not suitable for ceramic tiles, terracotta and clinker, polished and finely sanded surfaces.
Do not use in wet areas.
Suitable for interior work only.
Additional information
| Purpose | |
|---|---|
| Capacity | |
| Manufacturer |
Do you have questions about the product?
Fill out the contact form below and we will contact you!
Application: the surface must be dry (residual moisture <2-4%) and clean. Switch off the floor heating before processing. The surface must be at room temperature. Application temperature between +12 and +25oC. Apply the product evenly with a brush, brush or roller, leaving no puddles. Repeat the procedure for well absorbed surfaces. Do not walk on surfaces that have not dried. Protect the surface from rain and moisture for 12 hours. To avoid defects in the chemical treatment and to determine the required impregnation time, it is recommended to test the effect of the product on a redundant piece of the same stone or on the invisible side of the product.
The product dries in about 4-6 hours.
Important: Do not use for impregnating rubber, plastic, lacquered, polished surfaces and solvent-containing materials. No foodstuffs shall be present in the work area.
Consumption: 5-10m2/l, depending on surface absorption.
Store in a tightly closed container in a cool place out of the reach of children. See date of manufacture on the packaging. Shelf life 2 years.
Once dried, the product is not hazardous to health.
Application: the surface must be dry (residual moisture <2-4%) and clean. Switch off the floor heating before processing. The surface must be at room temperature. Application temperature between +12 and +25oC. Apply the product evenly with a brush, brush or roller, leaving no puddles. Repeat the procedure for well absorbed surfaces. Do not walk on surfaces that have not dried. Protect the surface from rain and moisture for 12 hours. To avoid defects in the chemical treatment and to determine the required impregnation time, it is recommended to test the effect of the product on a redundant piece of the same stone or on the invisible side of the product.
The product dries in about 4-6 hours.
Important: Do not use for impregnating rubber, plastic, lacquered, polished surfaces and solvent-containing materials. No foodstuffs shall be present in the work area.
Consumption: 5-10m2/l, depending on surface absorption.
Store in a tightly closed container in a cool place out of the reach of children. See date of manufacture on the packaging. Shelf life 2 years.
Once dried, the product is not hazardous to health.
