Use: Switch off floor heating. Dilute R155 with water (1:2 to 1:10), depending on the level of surface contamination, and apply to the cooled surface using a broom, brush or other suitable tool. Leave for 10 minutes but do not allow to dry, reapply the product and remove the dirt. Afterwards, rinse the surface thoroughly with clean water. Repeat the procedure if necessary. For difficult to remove stains, use undiluted R155. For regular cleaning of surfaces and removal of protective films, dilute R155 approx. R155 should be diluted 1:20.

To avoid defects in the chemical treatment and to determine the required cleaning time, it is recommended to test the effect of the product on a redundant piece of the same stone or on the invisible side of the product. The treatment temperature shall be between +12 and +25 °C.

Important: Avoid direct sunlight during processing. Do not use on plastic, polished or waxed wood or lacquered surfaces. If such surfaces are splashed with the product, wipe them off immediately and rinse thoroughly with clean water.

Usage: approx. 5-15^m2/litre undiluted and up to 150^m2/litre for regular cleaning.

Non-flammable, non-toxic, non-volatile, low odour.

Shelf life of several years when stored in a cool dry place.

Download specification