The website is currently being maintained, we apologise for any inconvenience. For the old version of the site, click here
Stone cleaner HMK R175 (concentrate), Möeller Chemie
Price:
0.00€
It is a special concentrated acid-based cleaner for removing cement deposits, lime scale, mortar residues, rust stains and post-construction dirt from all acid-resistant natural and artificial stone surfaces. Removes hardened dirt and cement deposits and stops the development of rust stains.
Suitable for cleaning polished granite. Thanks to the special rust inhibitors in the product, it is very suitable for cleaning hard and soft stones, including polished stones, affected by rust. It is very suitable for the cleaning and maintenance of granite with a high iron content, as the special active ingredients limit the development of rust.
For outdoor use only.
For professional use only!
Additional information
| Purpose | |
|---|---|
| Capacity | |
| Manufacturer |
Do you have questions about the product?
Fill out the contact form below and we will contact you!
Use: Protect nearby surfaces from possible spills. Make the solution in an area where spills will not damage other surfaces. Moisten the surface to be treated with water. Apply R175 diluted with water (1:2 to 1:15 depending on the level of contamination) to the surface using a broom, brush or other suitable tool.
Wait a few minutes (without letting it dry), process again and remove any residual dirt. The surface shall then be thoroughly cleaned with R155 cleaning agent diluted with water at a ratio of approximately 1:20. The cleaned surface shall be thoroughly rinsed with water. In case of very heavy contamination, the cleaning process shall be repeated.
The product contains strong acids! To avoid defects in the chemical treatment and to determine the required cleaning time, it is recommended to test the effect of the product on a redundant piece of the same stone or on the invisible side of the product. The treatment temperature shall be between +12 and +25 °C.
Important: Avoid direct sunlight during processing. Acid-sensitive surfaces, polished or honed marble, limestone, agglomerates, concrete products, metals, plastics may be damaged during cleaning.
Consumption: approx. 10-50m2/litre.
Store in a cool place. The lid must be tightly closed. Shelf life several years.
Use: Protect nearby surfaces from possible spills. Make the solution in an area where spills will not damage other surfaces. Moisten the surface to be treated with water. Apply R175 diluted with water (1:2 to 1:15 depending on the level of contamination) to the surface using a broom, brush or other suitable tool.
Wait a few minutes (without letting it dry), process again and remove any residual dirt. The surface shall then be thoroughly cleaned with R155 cleaning agent diluted with water at a ratio of approximately 1:20. The cleaned surface shall be thoroughly rinsed with water. In case of very heavy contamination, the cleaning process shall be repeated.
The product contains strong acids! To avoid defects in the chemical treatment and to determine the required cleaning time, it is recommended to test the effect of the product on a redundant piece of the same stone or on the invisible side of the product. The treatment temperature shall be between +12 and +25 °C.
Important: Avoid direct sunlight during processing. Acid-sensitive surfaces, polished or honed marble, limestone, agglomerates, concrete products, metals, plastics may be damaged during cleaning.
Consumption: approx. 10-50m2/litre.
Store in a cool place. The lid must be tightly closed. Shelf life several years.