The website is currently being maintained, we apologise for any inconvenience. For the old version of the site, click here
Cement and salt descaler HMK R165 (concentrate), Möeller Chemie
Price:
0.00€
It is a concentrated special cleaner for the removal of cement deposits, lime and salt deposits, mortar residues on all acid-resistant surfaces of natural stone and concrete blocks, unglazed vitrified tiles, untreated concrete stones, bricks.
For professional use only.
Additional information
| Purpose | |
|---|---|
| Capacity | |
| Manufacturer |
Do you have questions about the product?
Fill out the contact form below and we will contact you!
Use: Switch off floor heating. Dilute R165 with water (1:2 to 1:20 depending on the level of contamination) and apply to the cooled surface using a mop, brush or other suitable tool. Wait a few minutes (without allowing to dry), treat again and remove the contaminated layer. The surface shall then be thoroughly cleaned with HMK R155 cleaner diluted approximately 1:20 with water. The cleaned surface shall be thoroughly rinsed with water. In case of very heavy contamination, the cleaning process shall be repeated.
To avoid defects in the chemical treatment and to determine the required cleaning time, it is recommended to test the effect of the product on a redundant piece of the same stone or on the invisible side of the product. The treatment temperature shall be between +12 and +25 °C.
Important: Avoid direct sunlight during processing. Acid-sensitive surfaces, polished or honed marble, limestone, metals, plastics may be damaged during cleaning.
Consumption: approx. 10-40m2/litre.
Shelf life of several years when stored in a cool dry place.
Use: Switch off floor heating. Dilute R165 with water (1:2 to 1:20 depending on the level of contamination) and apply to the cooled surface using a mop, brush or other suitable tool. Wait a few minutes (without allowing to dry), treat again and remove the contaminated layer. The surface shall then be thoroughly cleaned with HMK R155 cleaner diluted approximately 1:20 with water. The cleaned surface shall be thoroughly rinsed with water. In case of very heavy contamination, the cleaning process shall be repeated.
To avoid defects in the chemical treatment and to determine the required cleaning time, it is recommended to test the effect of the product on a redundant piece of the same stone or on the invisible side of the product. The treatment temperature shall be between +12 and +25 °C.
Important: Avoid direct sunlight during processing. Acid-sensitive surfaces, polished or honed marble, limestone, metals, plastics may be damaged during cleaning.
Consumption: approx. 10-40m2/litre.
Shelf life of several years when stored in a cool dry place.