The website is currently being maintained, we apologise for any inconvenience. For the old version of the site, click here
Impregnant HMK S233, Möeller Chemie
Price:
0.00€
It is a ready-to-use silicone-based impregnator.
Reduces dirt and water penetration.
Slightly enhances the colour and texture of stone.
Suitable for all natural and artificial stone surfaces, agglomerates, terrazzo, concrete slabs, unglazed bricks, clinkers, as well as for polished surfaces.
Suitable for interior and exterior applications.
Additional information
| Purpose | |
|---|---|
| Capacity | |
| Manufacturer |
Do you have questions about the product?
Fill out the contact form below and we will contact you!
Application: the surface must be dry (residual moisture <2-4%) and clean. Switch off the floor heating before processing. The surface must be at room temperature. Application temperature between +12 and +25oC. Apply the product liberally and evenly with a brush, brush or roller. Spraying on walls is possible. Repeat the procedure after 24 hours for well absorbed surfaces. On poorly absorbent surfaces, remove residues with a cloth. To avoid defects in the chemical treatment and to determine the required impregnation time, it is recommended to test the effect of the product on a redundant piece of the same stone or on the invisible side of the product. Do not walk on surfaces that have not dried. Protect the surface from rain and moisture for 12 hours. Do not use on rubber, plastic, lacquered surfaces and solvent-containing materials. There must be no food in the workplace.
Consumption: 5-15 m2/l, depending on surface absorption.
Store in a tightly closed container in a cool place out of the reach of children. See date of manufacture on the packaging. The product is not hazardous to health once dried.
Application: the surface must be dry (residual moisture <2-4%) and clean. Switch off the floor heating before processing. The surface must be at room temperature. Application temperature between +12 and +25oC. Apply the product liberally and evenly with a brush, brush or roller. Spraying on walls is possible. Repeat the procedure after 24 hours for well absorbed surfaces. On poorly absorbent surfaces, remove residues with a cloth. To avoid defects in the chemical treatment and to determine the required impregnation time, it is recommended to test the effect of the product on a redundant piece of the same stone or on the invisible side of the product. Do not walk on surfaces that have not dried. Protect the surface from rain and moisture for 12 hours. Do not use on rubber, plastic, lacquered surfaces and solvent-containing materials. There must be no food in the workplace.
Consumption: 5-15 m2/l, depending on surface absorption.
Store in a tightly closed container in a cool place out of the reach of children. See date of manufacture on the packaging. The product is not hazardous to health once dried.
