The website is currently being maintained, we apologise for any inconvenience. For the old version of the site, click here
Pre-treatment for stone and decorative tiles HMK S749, Möeller Chemie
Price:
0.00€
It is a ready-to-use, solvent-free impregnating agent. The finishes shall be treated before installation.
Reduces the hygroscopicity of materials, the penetration of water and salt into the surface, and the penetration of water and joint putty into materials, thereby reducing the likelihood of negative deep reactions. Reduces the risk of deformation.
Suitable for natural and artificial stone, clay tiles, brick surfaces.
Not suitable for all rūfor these slates and ceramic tiles, ceramic granite and composite materials!
For interior and exterior work.
Additional information
| Purpose | |
|---|---|
| Capacity | |
| Manufacturer |
Do you have questions about the product?
Fill out the contact form below and we will contact you!
Use: The product must be treated on all sides. Apply the product evenly in thin coats with a brush, brush or roller, leaving no puddles. The product can also be sprayed on or dipped into the finish. After 10 minutes, remove any residue with a paper towel. After drying (approx. 30 min), the parts can be fixed to the substrate with adhesive or mortar. We recommend additional impregnation to improve the properties of the surfaces.
Do not walk on undried surfaces. There must be no food in the work area.
To avoid defects in the chemical treatment and to determine the required cleaning time, it is recommended to test the effect of the product on a redundant piece of the same stone or on the invisible side of the product.
Usage: 5-10m2/1L, depending on the absorbency of the surface.
Store in a tightly closed container in a cool place out of the reach of children. See date of manufacture on the packaging. Shelf life 1 year.
Use: The product must be treated on all sides. Apply the product evenly in thin coats with a brush, brush or roller, leaving no puddles. The product can also be sprayed on or dipped into the finish. After 10 minutes, remove any residue with a paper towel. After drying (approx. 30 min), the parts can be fixed to the substrate with adhesive or mortar. We recommend additional impregnation to improve the properties of the surfaces.
Do not walk on undried surfaces. There must be no food in the work area.
To avoid defects in the chemical treatment and to determine the required cleaning time, it is recommended to test the effect of the product on a redundant piece of the same stone or on the invisible side of the product.
Usage: 5-10m2/1L, depending on the absorbency of the surface.
Store in a tightly closed container in a cool place out of the reach of children. See date of manufacture on the packaging. Shelf life 1 year.
